For all Used Parts Sales:
Call Jon Salemi @ DMPE Inc. New York Office:
716-832-7583
Ask us about our Carbon Fiber Injector Hat trade in program
Sonny's 5 inch Bore Center Heads and Hogan Mainifold
![001[1]](http://www.dmpeinc.com/UPLOADED_FILES/001[1].JPG)
Sonny's heads 5" bore spacing with titanium valves and springs, the heads are cast and in great shape, they are o-ringed for head gasket and for intake manifold, also comes with new valve covers. Hogan blower manifold new never used only bolted down once for mock-up.
$4000.00
C.G. Composites MK 5X LT Injector Hat
Low Lap count on this hat
9.5 bottom opening
Spread front bolt pattern
5.5 inch blades
Proven Front runner
$2,650.00
C.G. Composites MK 8 LT 9.5 or 10.5 Injector Hats
Used with Dyno time only
Positive stops in housing
65 Sq In. Area
Spread Front Bolt pattern
$600.00 Discount
$3000.00
14-71 K-11 Top Fuel Supercharger
14-71 DMPE Standard Rotor K-11
Removable Top Insert Shoe
End Frame Modifications with teflon
Rotor Plugs
12 Bolt Snout Flange
5 runs total
$4,500.00 or offer
5 Second Turn Key Top Dragster
265 inch Ray Miller hardtail Chassis 6.00 Spec
Billet AJ 481-X 4.500 bore 4.125 stroke
Kobelco 14-71 Non superman DMPE mods
990 Enderle pump DMPE Fuel System
MSD 44 amp mag
8973 pro mag controller
Racepak v-300SD flow meter all pressures, egt's, digi dash.
Coan Shorty glide 1.68 ratio with bolt together Coan converter.
Full floater rear
Goodyear 34.5's on Weld beadlocks 16 x 16
Dual Stroud chutes
Delay's and crossovers
All the right parts to go fast bracket racing.
This is a consistent 6.10 car @ 230. Has gone 5.97 @ 233
$50,000
Please call 716-832-7583 for more info.
16-71 Kobelco K-8 Non-Superman
8 inch RCD Snout
14.2 Restraint
Blower Bag
Top Shoe Insert modification
Good Shape
$4,600.00
Alan Pittman Built Lightweight 63 Vette Pro Mod
![headhunter2[2]](http://www.dmpeinc.com/UPLOADED_FILES/headhunter2[2].jpg)
1963 Corvette built by Alan Pittman. Car was oringinally designed for ADRL, but has been ran in IHRA & NHRA Pro Mod. Car will be sold turn key with some extra parts and data we collected from our racing.
Has gone 6.05 @ 238 Mph in legal trim.
Engine: Alan Johnson 526 Hemi with AJ2 heads. TFX Billet block. 14-71 M5 DMPE bloewer.
Current 25.1 E cert. All bolt on titanium parts or carbon fiber parts. Weights 2430 with 220 Lb. driver with no ballast.
Clutch: AFT 11" Dual Disk
Trans: CS1 Lenco 3 speed
MW Modular 9.5 Rear End
Strange Ultra Case 9.5 4.56 Rear Gear
Racepak V300 SD
Trick Titanium Can
Will seperate Engine, Trans, and Clutch.
Cynergy Carbon Fiber Rear Element wing
Call for more details.
Turn Key: $150,000.00
Rolling: $100,000.00
Misc Blown Alcohol Parts
Hogan's 14-71 Roots blower manifold for Std deck BAE with nozzle's $2,500.00
More Blown Alcohol New & Used
2 R&R rods new 7.351 C to C $75.00
8 new JE pistons (stock BAE) $75.00 Each .017 X 1/16 x 3/16
8 used 5 runs je pistons $400.00 Set .017 X 1/16 x 3/16
6 used 45 runs JE pistons $100.00 017 X 1/16 x 3/16
5 new Exhaust pushrods $75.00 .100 tall deck BAE
16 complete set used pushrods $150.00 .100 tall deck BAE
20 new 3/8 rocker arm adjusters $50.00
2 new 14mm belts 1610s 65 wide $200.00 each
1 55 MM cam 296/296 .500 $350.00
14 mm 26 27 28 30 3/4'' offset 30 32 32 36 36 37 38 38 39 40 42
call for pricing on pullies
1 US Gear 3.89 9.5'' new gear $475.00
1 US Gear 4.57 9.5'' gear 15 runs $350.00
1 fresh rebuilt Enderle 1100 17.1 gpm. $400.00
Dailey Engineering Billet Oil Pan and Scavenge System
Dailey Engineering Billet Hemi Oil Pan
5 Stage Scavenge Pump built in On Billet Pan
Dunn Dummy drive
System 1 Wet Oil Pump
Over $4600.00 invested
2 Complete units available
Detailed pics on request for each part
$2,500.00 or offer
Kobelco K-9 Rotors
K-9-14-71 Rotors with Gears
10 Runs (Great Shape)
$2000.00
